Our L.A Ladder & Stepladder Combined User & Inspection Training Course delivers a minimum of 7 hours of instruction and is designed to instruct up to a maximum of 8 delegates, providing training for users, supervisors and managers wanting to equip themselves with the knowledge, skills and confidence necessary to use and formally inspect ladders and step ladders legally and safely.
Written with the guidance from the UK's leading experts on ladder manufacture, maintenance and safety, the Ladder Association scheme addresses all the issues raised by the Health and Safety at Work Act 1974, Provision and Use of Work Equipment Regulations 1998 and, more recently, the Work and Height Regulations 2005.
Under the regulations every person in the chain leading up to, and including, the final user, has a duty of care to both themselves and others to know and understand the practical implications of working safety at height. Demonstration of competence is a key requirement of the new regulations and successful completion of the L.A Ladder and Step Ladder Training Course provides proof of such competence.
This course consists of a training room lecture, presentation, written assessment, practical training and assessment.
This course is aimed at personnel who are or will be responsible for use and formal inspection of Ladders and Step Ladders in the work place. There are no prerequisites required for this course although a working knowledge of ladders is an advantage.
Since the safe use of ladders and step ladders requires that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any ladder user. In addition, delegates should be fit and capable of lifting and carrying ladders and step ladders.
Please note that delegates will be expected to work at height whilst climbing a ladder for the practical, so please ensure delegates are in good health and do not have a fear of heights that may preclude them from taking part in the practical assessment.
To meet the revised EN 131 standard, ladders are designed and tested to take a maximum total load of 150kg including the user, their tools and any materials. Please ensure delegates do not exceed this limit, otherwise they will not be able to complete the practical session and therefore the course.
The agenda for the L.A Ladder & Stepladder Combined User & Inspection course includes:
- Legislation and Regulations affecting Work at Height
- Requirements for the use of Ladders and Step Ladders
- Product standards and classifications for Ladders and Step Ladders in the workplace
- Hazards affecting the use of Ladders and Step Ladders
- The need to planning using the S.T.E.P format
- Site
- Task
- Equipment
- Personnel
- Operator’s Pre-Use and Step Ladder Inspection
- Correct Storage and Transport of Ladders
This course also aims to provide a nationally recognised inspection qualification for ladders and stepladders enabling users to:
- Accurately record details of ladders
- Identify component parts using industry standard naming conventions
- Thoroughly inspect ladders and stepladders, and identify safety critical faults
- Record your findings in accordance with statutory requirements (as outlined in PUWER ACOPs 163)
- Recommend action to be taken if faults found
Successful delegates will receive a Ladder Association Ladder & Step Ladder Users & Inspection e-certification valid for a period of 5 years from the date of the course. They will gain an understanding of current relevant legislation and best practice on a range of ladders and step ladders, be able to utilise them safely and in-line with current approved methods and manufacturer’s instructions, and be able to carry out both pre-use S.T.E.P inspections and formal inspections of Ladders & Step Ladders.
Our FAQ area is the best place to look to find answer to your questions. Our community and support team
constantly update the questions and answers.
As most of our Ladder courses involve practical work at height, you will be required to wear PPE during your training and assessment. This includes safety boots, safety helmet with a chin strap, and high-visibility clothing. Full details of PPE requirements will be outlined in your booking confirmation email and joining instructions.
If needed, PPE can be purchased from Reception at our Tonbridge and Ashford Training Centres. All course materials, including manuals and practical training equipment, are provided.
Yes, we can absolutely offer you support. We understand that everyone learns differently, and we’re committed to making our courses accessible to all. Our instructors are experienced in delivering training to individuals with varying levels of reading and writing ability.
We can offer additional verbal guidance, practical demonstrations, and one-to-one support when attending training courses at one of our training centres. If required, we can also arrange for assistance during written assessments, such as a reader.
Please let our support team know in advance if you have any concerns, and we’ll do everything we can to support you in successfully completing your training.
Several of our training courses involve practical elements, which may include working at height, lifting equipment, or operating machinery. You should be in good general health and physically able to take part in these activities safely. If you have any medical conditions, injuries, or concerns that may affect your ability to participate, please let our support team know in advance so we can advise you on course suitability and any reasonable adjustments that may be available.
Kentec Training is a registered CITB Approved Training Organisation (ATO). This means that we can apply for automated grants on your behalf from CITB towards your training costs for the achievement of approved short courses. For full guidance on eligibility, available grant amounts, and how to make a claim, please visit our CITB Short Course Grants page or speak with your company’s CITB Grant & Levy contact.
View All FAQs